Hazardous area computers, designed to serve industry needs

Posted by Business Deals , Labels: , , , , , , Tuesday, 26 July 2011 00:18

If you are a manufacturer or personal computers or personal computer hardware components, you will have to conform to certain directives laid down by the governing bodies. These days, there is good scope of business in industrial personal computers. However, there are ATEX directives that you need to follow at all times when you are manufacturing industrial computers.

Before you plan to start the manufacturing of industrial personal computers or hazardous area computers, you will have to understand the ATEX directives and guidelines. You will have to visit the internet and get all the latest information on the ATEX directives and guidelines. You can also download the directives from the internet.

You will then have to get into a meeting with the production heads and discuss the future path of action. To become a leading manufacturer of ATEX computers, you will have to make sure that you use the best raw materials. You will have to spend some funds in innovative methods and processes. When you come out with something different from the conventional machines, you gain the attention of the buyers.

If you are a buyer looking out for industrial personal computers or hazardous area computers, you will have to check if the manufacturer has conformed to the ATEX directives and guidelines. As a user of industrial personal computers or hazardous area computers, you will have to check the zones to which the industrial personal computers or hazardous area computers belong to. Prevention is better than cure; so make sure that you take all the precautions when you are working in an industrial setup.

Index Plastics are leading suppliers of magnetic ceiling hooks. These are simple and easy to use hooks to attach hanging wires to store ceilings. You can get a wide range of magnetic hooks here. Visit http://www.indexplastics.co.uk for more information.


Previous Post : All about ATEX zone 1 computers

All about ATEX zone 1 computers

Posted by Business Deals , Labels: , , , , 00:03

If you are a manufacturer or a buyer of industrial products, then you need to know the basics of the ATEX Directive. You need to be aware of the fact that compliance with ATEX Directive is a legal requirement in all European Union Member states.

You can get lots of information on the ATEX Directives and the products that conform to these directives on the internet. If you are a manufacturer of industrial equipment, or a supplier of industrial equipment in the European Union, then you will have to be aware of the various ATEX Directives and the various ATEX zones.

When you are aware of these directives and zones, you will have a clear understanding of the industrial equipment that is needed for each of the zones. The main purpose of ATEX is to eliminate or minimize the risk of ignition in explosive risk areas. So, if you are manufacturing ATEX zone 1 computers or other industrial equipment, you will have to ensure that your products conform to the ATEX zone 1 directives or guidelines.

ATEX directives are not nice to have guidelines, but a mandate and they need to be followed at all times. Manufacturers of industrial equipments need to make sure that they have proper processes in place to monitor the conformity to the ATEX directives. If you are a manufacturer of industrial computer monitors or other parts, you will get comprehensive information in the internet. You can also take help from the ATEX experts or consultants in the industry.

Index Plastics are leading suppliers of magnetic ceiling hooks. These are simple and easy to use hooks to attach hanging wires to store ceilings. You can get a wide range of magnetic hooks here. Visit http://www.indexplastics.co.uk for more information.

Previous Post : Use of Temperature Controllers

Use of Temperature Controllers

Posted by Business Deals , Labels: , , , , , Tuesday, 19 July 2011 23:53

Temperature controllers are used to keep the temperature stable at any given situation. Whenever the product has to be heated or cooled or both have to be done, the temperature has to be controlled at the set level irrespective of the environment around the process. Be it your car heater or a blast furnace in an industry a temperature controller is used.

Basically these controllers operate in 2 forms- the open loop wherein you would have to constantly monitor the temperature output or the sophisticated closed loop wherein the desired temperature is maintained; despite the outside environment the set temperature is always maintained.Temperature controllers are used in a simple form in household items such as heaters, refrigerators, etc. They are more complex in industries involved in manufacturing or research, these industries include plastic, Food, healthcare, packaging and in boilers and furnaces.

There are several points which have to be considered while selecting a temperature controller- firstly whether the sole aim is to keep the temperature at the fixed value. Secondly it is helpful if it has automatic switching and alarm output. Thirdly, some controllers also can be routed through computers so that there is more efficient monitoring of temperature. Fourthly, sensitivity of this device should also be checked. These are few general points which are recommended, however, based on the nature of the industry the requirements may vary.

However for more comparisons and characteristics of temperature controllers, one can access the internet, there you not only find the latest and best equipment, there is also enough information for you to make the right choice.

Packaging Supplies: Index Plastics offers range of packing supplies, hanging solutions, point of sale and other retail display related products. We are one of the leading providers of packaging & hanging solutions in UK. Visit http://www.indexplastics.co.uk for more information.

Previous Post : Factors to be concerned in the process heating

Factors to be concerned in the process heating

Posted by Business Deals , Labels: , , , , , , , 23:49

While considering process heating in an industry there are a few basic factors to be taken into consideration before selecting the equipment for the process.Firstly the material concerned, temperature at which it has to be heated/cooled, the maximum temperature etc. has to be ascertained. Then the cost involved, power consumption and the required accuracy level is to be determined. The Watt density and sheath material (copper, steel, etc) has to be determined, actually that would depend on the material and the kind of heater used.

Thirdly, the heater type has to be determined, whether you would choose from conduction i.e. Cast heaters, immersion, etc. or convection or the latest infrared halogen and ultraviolet lights. There are quite a few types to choose from. Fourthly a proper temperature sensor has to be selected this would depend on the kind of environment it would be used in whether it would be a volatile area or high temperature one. Finally the kind of temperature control has to be chosen two best choices would be whether it is open loop or a closed loop one.

Once these basics decision are made, thought has to be given to decrease operating and maintenance costs, better stability and long life. Normally process heating changes are undertaken if the equipment in place is not giving the desired result or the process is a new one. So the best option would be to design a process according to the conditions of the industry and its requirements. So getting a tailor made solution to cater to your process heating it the best option.

Searching ideas for Team building exercises ? Penguins provide ideas for corporate team building that can fit into your event. They will manage and run corporate team building activities that will suit your needs

Previous Post : Give printing a 3D dimension with Hp

Give printing a 3D dimension with Hp

Posted by Business Deals , Labels: , , , , , , , , , Friday, 1 July 2011 02:05

If you are searching hard for a good 3D printer in the market, you need to check out the HP 3D printers first. There are some key aspects of a 3D printer that you need to keep in mind when you are selecting the printer from the market. A good 3D printer is one that most people can use without much of a problem the instructions on the 3D printers need to be clear so that even a layman can understand.

There are three main things that you need to look at in a commercial 3D printer. First is the affordability. The second is the model quality and the third is the ease of use. For small companies that are into 3 D modeling or printing, the HP 3D printers have come like a blessing in disguise.

The main 3D colors that are used in the 3D printers are ivory, black, red, olive green, nectarine, fluorescent yellow, blue, and grey. The power consumption of an average 3D printer is very high. For example, an HP Designjet 3D Printer series would consume at least 1200 watts of power. This is quite alarming and you need to make sure that you switch the 3D printer off when you are not using it.

You will have to take some safety precautions when you are handling the 3D printers. The user manual of the 3D printers will give you all the information you need on the particular 3D printer either from HP or from any other company.

Tricool specialises in manufacturing and renting temperature control units, tool heaters and other bespoke units to suit your needs. You can rent or buy these temperature control units

Previous Post : Designjet l25500 latex printer

Designjet l25500 latex printer

Posted by Business Deals , Labels: , , , , , 02:01

If you are searching for the HP’s Designjet l25500 latex printer, then you can either buy it directly from HP or you can buy it from one of its authorized resellers. The Designjet l25500 latex printer is best suited for small sized photo shops and advertising companies. The printer has been known to help small businesses meet their operational, growth and profit goals. The Designjet l25500 latex printers are generally bought by business firms who want to expand their business. HP is a very good company and has lots of years in the manufacture of printers.

You will get total support from their customer support after you have bought the Designjet l25500 latex printer. As the name suggests, the Designjet l25500 latex printers use latex inks, which are odourless and durable. These latex inks give out very low levels of volatile organic compounds or VOCs. This means that there is no special ventilation required while using the Designjet l25500 latex printers. Some inferior printers are giving out the volatile organic compounds or VOCs, which are bad for human life as well as for the environment.

Using these eco friendly inks, HP has shown the world that it cares for the environment and the people who live on it. The inks used in the Designjet l25500 latex printers do not require special handling. Moreover, these inks are non-combustible and non-flammable. If you have checked out the prices of the Designjet l25500 latex printers at few resellers, you will see that there is not much of a difference.

Tricool specialises in mould heaters, tool heaters and other bespoke heating and cooling units. You can get these mould heaters, tool heaters, and other units

Previous Post : Order affordable plastic cards online

Order affordable plastic cards online

Posted by Business Deals , Labels: , , , , , , Thursday, 30 June 2011 05:50

If you want to save the cost of pencils, pens and other promotional give-a-ways then you need to make investment in plastic business cards. Most of these promotional give-a-ways get pushed in our desk drawers. To extend the image and the brand personality of your company, you can use a plastic business card.

There are many card printing companies that lure their customers by charging rock bottom prices. Low cost of the plastic cards is not the only thing that you need to look at. The design factor is also very important when you are printing your business cards.

In the past when you had to get your business card printed, you had to visit the plastic card printing company’s office during the business hours. It would take a very long time to get the business cards printed because of several bottlenecks.

These days, you don’t have to go to the card printing company’s office because you can place an order on the internet. Most card printing companies have their websites on the internet and they get almost all their transactions done using these websites.


If you spend a little time to browse the internet, you will be surprised as there are many companies that are offering superb quality of plastic business cards for your institution or organization. You need to choose from the vibrant colours and seemingly endless designs.

It is very essential that the membership card reflects the objectives and ideas of your company apart from the quality and style of the card. At fair prices most of these companies do the plastic cards printing. They make great efforts to make the membership cards impressive. You may also get your order within a few days of its allotment.

Previous Post : Build your brand image with quality membership cards

Subscribe to: Posts (Atom)